Overture PETG on a P1S

I was having some serious issues printing Overture PETG on my Bambu P1S. Lots of blobbing and stringing. I ended up doing a bunch of calibration tests in Orca Slicer and came up with dropping the temperature and increasing the flow rate.

From the default "Generic PETG" change the following:

  • Print Temperature First Layer -> 225C
  • Print Temperature Other Layers -> 225C
  • Flow Ratio -> 1.045
  • Bed Temperature -> 80C

With those settings I am getting near perfect prints like I do with PLA.

You'll only receive email when they publish something new.

More from highteklowlife
All posts